soft receivers

You have a receiver and need to update it

To download the latest software and updates

Updates are very important for every device

Thanks to updates, we keep our devices from old problems and enjoy the extras that are added in the new updates

Receiver refers to a device that receives signals, data or information from another device or system. In various fields, the term “recipient” can have different meanings, including:

In electronics, a receiver is a device that processes and decodes electronic signals.

In radio or television broadcasting, a receiver is a device that captures and decodes the broadcast signal.

In communications, a receiver is a device used to receive messages or signals transmitted over a network.

The specific meaning of “receiver” depends on the context in which it is used.

Receiver update file refers to a software or firmware update designed to improve device performance, stability or functionality. Update files for receivers are usually distributed by the manufacturer or vendor and can be downloaded and installed on the device through various methods, such as over-the-air (OTA) updates, USB drives, or a computer connection. The update file contains the necessary code changes, bug fixes, and new features for the receiver. Installing the update file can help resolve any issues with the receiver and ensure that it is operating optimally. It is important to follow the manufacturer’s instructions when updating your receiver to prevent any potential problems or malfunctions.

Why should I download the update from here giga-up.receivers:

1. Avoid any file that contains viruses that may harm your device and may damage it.
2. Get the right update.
3. Visit giga-up.riversers and check for yourself if there is a new update or not.

4. Using a USB key:

You can access the giga-up.receivers website, and search within the site to update the device, or you can search giga-up.riversivers for the update, then download the update and put it into a USB key in order to update the receiver.

5. By computer:

This method is used if the receiver is jerky and its settings cannot be accessed. In this case, the receiver must be connected to the computer via the RS232 input on the receiver, and then start the process of flashing the device.

What’s a loader and how to use it?

Sometimes During Software upgrades or downgrades due to wrong Software or any other mistake our Satellite Receiver goes dead or stuck on a red light. So in that case we have two ways to recover our satellite Receiver. We can recover our box with a loader tool, and the second option we have is the Bios flashing Programmer which is available mostly in mechanics.
But in that post, I’ll discuss the loader tool.

Loader tool is a computer Software, which every Satellite
manufacturer is providing to their users for use during any damage or losses. For the Recovery of our Receiver, we need three 3 basic things. (1) Computer. (2) RS232 Cable and (3) Loader tool.
May you know about computer or laptop so I don’t need to discuss further computer.

What’s RS232 Cable?

For the injection of software to our Box, we need three main Connections RX, TX, And GND from our Satellite Receiver to Computer or loader. So for that, We need to connect or STB or Satellite Receiver to our Computer or laptop. in that case, we need a specific Cable, which is called Rs232 or db9 cable. You can purchase Rs232 Cable in any local elections market or from any Satellite dish mechanic Shop, even you can also buy from any online store. “Satellite receiver loader tools”

Rs232 Cable for laptop User.

If you have a laptop user and you want to use all that process on the laptop then you need to buy two cables one is the Rs232 to Usb male Cable, and the second one is Rs232 female to female cable. These two cables are not very much expensive. And you can buy very easily from any Electronic market or online store. But be noted we need to inject the Software to any Satellite Receiver through Ch341 or Ch340 IC, so when you buy the Rs232 USB cable, you have to demand from the shopkeeper to give you the Rs232 USB cable with Ch340 or Ch341 Supported IC. Otherwise, the Loader will not Work.

Rs232 Cable for PC/Computer Users.

If you have a PC or Computer and you want to use the loader on that. Then you have to need to buy one simple cable RS232 female to Female Cable. And you can do all the process with that Single Cable.

RS232 Mini Cable/Jacket.

For doing all these Processes Our Receiver has must the Rs232 Jacket or Port. So in Now days mostly Receiver are coming without External RS232 Port. In that case, we need to Inject another Mini Rs232 Cable inside our Receiver. You can also take this mini Rs232 cable from any dish Satellite Receiver mechanic shop or you can also remove it from any other old Receiver.

loader tool.

When you have arranged all the above things as per your requirement, after that you need to loader tool regarding your satellite Receiver processor. There’s multiple Satellite Receiver manufacturer with different Processor. and in that post, I’m going to share with you all satellite receiver loader tools for download.